Your Search returned 10 Results In 0.010 seconds
For full specification Click Here
Single Pole Miniature Circuit Breakers.
ETIMAT 10 MCBs are produced according to the latest international standards EN60898, IEC60898 and IEC60947-2. These MCBs are for protection and control of circuits against overloads and short circuits in commercial and industrial applications.
Characteristic C is recomended for industrial applications where higher starting effects are expected e.g. transformers, motors and lighting installations.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 5 to 10 x In.
Characteristic D is recomended for heavy industrial applications where very high starting effects are expected, e.g. motors starting under load.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 10 to 20 x In.
ETIMAT 10 MCBs are produced according to the latest international standards EN60898, IEC60898 and IEC60947-2. These MCBs are for protection and control of circuits against overloads and short circuits in commercial and industrial applications.
Characteristic C is recomended for industrial applications where higher starting effects are expected e.g. transformers, motors and lighting installations.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 5 to 10 x In.
Characteristic D is recomended for heavy industrial applications where very high starting effects are expected, e.g. motors starting under load.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 10 to 20 x In.
1 Pole C & D Type MCBs
For full specification Click Here
Double Pole Miniature Circuit Breakers.
ETIMAT 10 MCBs are produced according to the latest international standards EN60898, IEC60898 and IEC60947-2. These MCBs are for protection and control of circuits against overloads and short circuits in commercial and industrial applications.
Characteristic C is recomended for industrial applications where higher starting effects are expected e.g. transformers, motors and lighting installations.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 5 to 10 x In.
Characteristic D is recomended for heavy industrial applications where very high starting effects are expected, e.g. motors starting under load.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 10 to 20 x In.
ETIMAT 10 MCBs are produced according to the latest international standards EN60898, IEC60898 and IEC60947-2. These MCBs are for protection and control of circuits against overloads and short circuits in commercial and industrial applications.
Characteristic C is recomended for industrial applications where higher starting effects are expected e.g. transformers, motors and lighting installations.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 5 to 10 x In.
Characteristic D is recomended for heavy industrial applications where very high starting effects are expected, e.g. motors starting under load.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 10 to 20 x In.
2 Pole C & D Type MCBs
For full specification Click Here
Triple Pole Miniature Circuit Breakers.
ETIMAT 10 MCBs are produced according to the latest international standards EN60898, IEC60898 and IEC60947-2. These MCBs are for protection and control of circuits against overloads and short circuits in commercial and industrial applications.
Characteristic C is recomended for industrial applications where higher starting effects are expected e.g. transformers, motors and lighting installations.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 5 to 10 x In.
Characteristic D is recomended for heavy industrial applications where very high starting effects are expected, e.g. motors starting under load.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 10 to 20 x In.
ETIMAT 10 MCBs are produced according to the latest international standards EN60898, IEC60898 and IEC60947-2. These MCBs are for protection and control of circuits against overloads and short circuits in commercial and industrial applications.
Characteristic C is recomended for industrial applications where higher starting effects are expected e.g. transformers, motors and lighting installations.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 5 to 10 x In.
Characteristic D is recomended for heavy industrial applications where very high starting effects are expected, e.g. motors starting under load.
Thermal release at 1.13 to 1.45 x In. Magnetic breaking release at 10 to 20 x In.
3 Pole C & D Type MCBs
For full specification Click Here
Our contactors comply with new international standard IEC-947. This standard is specially tough in contactor tests to ensure even better performance.
Three coil terminals. Electronic interface modules, electronic timers and surge suppressors which are connected direct to the coil without cables and which can be used together with front and/or side mounted auxiliary contact blocks.
The whole of the new range is also available with DC coils. The overall size of basic contactors is not increased in DC coil versions. The whole range of contactors can be mounted on standard 35mm DIN rail. Double clamp terminals can accommodate simultaneously two different sizes of cable or two different size of cable terminals.
Eight auxiliary contacts can be pulled in by the contactor, either by mounting six front blocks (1NO or 1NC) and one side block (2NO or 1NO + 1NC) or four side blocks, two each side. Horizontal interlock block : mechanical with electrical contacts (1NC + 1NC). Thermal overload relays, either fitting direct to the contactor or separate mounting on standard 35mm DIN rail.
Two versions of four pole contactors are supplied 4NO poles (types CL05...400M and CL07...400M) and 2NO + 2NC (types CL05...B00M, CL07...B00M and CL08...B00M) mainly used for two speed motor applications.
Three coil terminals. Electronic interface modules, electronic timers and surge suppressors which are connected direct to the coil without cables and which can be used together with front and/or side mounted auxiliary contact blocks.
The whole of the new range is also available with DC coils. The overall size of basic contactors is not increased in DC coil versions. The whole range of contactors can be mounted on standard 35mm DIN rail. Double clamp terminals can accommodate simultaneously two different sizes of cable or two different size of cable terminals.
Eight auxiliary contacts can be pulled in by the contactor, either by mounting six front blocks (1NO or 1NC) and one side block (2NO or 1NO + 1NC) or four side blocks, two each side. Horizontal interlock block : mechanical with electrical contacts (1NC + 1NC). Thermal overload relays, either fitting direct to the contactor or separate mounting on standard 35mm DIN rail.
Two versions of four pole contactors are supplied 4NO poles (types CL05...400M and CL07...400M) and 2NO + 2NC (types CL05...B00M, CL07...B00M and CL08...B00M) mainly used for two speed motor applications.
CL & CK Contactors
For full specification Click Here
Nortonics Foxtam Connecting Busbar comes in two types:
Pin Type
1, 2 3 phase solid copper conductors with pin attachments for connection of NORM modular components e.g. MCB’s and RCD’s.
Fork Type
1, 2 3 phase solid copper conductors with fork attachments for connection of NORM modular components e.g. MCB’s and RCD’s.
Pin Type
1, 2 3 phase solid copper conductors with pin attachments for connection of NORM modular components e.g. MCB’s and RCD’s.
Fork Type
1, 2 3 phase solid copper conductors with fork attachments for connection of NORM modular components e.g. MCB’s and RCD’s.
Connecting Busbar
For full specification Click Here
DIN RAIL MOUNTED FUSE HOLDERS
VLC10 (10x38mm) max 32Amp (previously called HSC-3810)
VLC14 (14x51mm) max 50Amp
VLC22 (22x58mm) max 100Amp
1,2 & 3 Pole
Type: VLC10 for fuse links 10x38mm, max operational current 32 Amps @ 690VAC
Rated making & breaking capacity: 75 Amps
Type: VLC14 for fuse links 14x51mm, max operational current 50 Amps @ 690VAC
Rated making & breaking capacity: 150 Amps
Type: VLC22 for fuse links 22x58mm, max operational current 100 Amps @ 690VAC
Rated making & breaking capacity: 150 Amps
VLC10 (10x38mm) max 32Amp (previously called HSC-3810)
VLC14 (14x51mm) max 50Amp
VLC22 (22x58mm) max 100Amp
1,2 & 3 Pole
Type: VLC10 for fuse links 10x38mm, max operational current 32 Amps @ 690VAC
Rated making & breaking capacity: 75 Amps
Type: VLC14 for fuse links 14x51mm, max operational current 50 Amps @ 690VAC
Rated making & breaking capacity: 150 Amps
Type: VLC22 for fuse links 22x58mm, max operational current 100 Amps @ 690VAC
Rated making & breaking capacity: 150 Amps
Fuse Holders
For full specification Click Here
M Series Contactors
Satisfying the latest international requirements
Unique ease of assembly
Designed for easy wiring
Maximum flexibility
Thermal overload relays with extra features
Satisfying the latest international requirements
Unique ease of assembly
Designed for easy wiring
Maximum flexibility
Thermal overload relays with extra features
M Series Contactor
For full specification Click Here
A robust, high quality range of pushbuttons, selector switches, key switches and emergency stop stations. All to IP65 protection rating.
Push Buttons
For full specification Click Here
RCBOs combined MCB/RCD two pole.
Providing the combined advantage of protection against earth leakage faults with short-circuit protection.
Providing the combined advantage of protection against earth leakage faults with short-circuit protection.
RCBOs Combined MCB/RCD Two Pole
For full specification Click Here
Din Rail Mounted Terminals A quality range of din rail mounted terminals suitable for "G" rail and "Top Hat" rail both shallow and deep. Available in 2.5mm, 4mm, 6mm, 10mm, 16mm, 35mm and 70mm. The material is PA68VOT110 and the standard colour is grey RAL7035, however on request blue RAL5015 is available. All terminals are CE marked. Common Terminal Blocks Available in three different formats and each format with three permitations. All units are constructed in the same way with brass bars with steel screws set into a poliammide bodywith a transparent policarbonate removable cover. All units can be mounted directly onto top hat din rail or screwed directly to a chassis plate.
Terminals
